Packaging and transportation of high efficiency vertical shaped sponge cutting machine

The ring knife sponge cutting machine has been properly unpacked and packed before leaving the factory. When lifting, the machine shall be operated according to the requirements and shape of the packing box. During the transmission process, the machine shall be prevented from deformation. The machine shall be unpacked at the equipment site (simple packaging and wooden box packaging). Before opening the package, check the outside of the package for any damage.

When unpacking the ring knife sponge cutter, please start from the top layer, and the side box plate can be lifted as a whole. Before unpacking the ring knife sponge cutter, check whether the mechanical condition is prominent, and check the accessories according to the packing list. In case of any short package, the responsible party shall perform relevant duties and submit it to relevant departments in writing for inspection. If it is within the scope of responsibility of our factory, please inform us of relevant information.

When the ring knife sponge cutter is transferred, the lifting equipment shall be used as much as possible to make the load of the lifting equipment greater than the weight of the machinery. Where there is no suitable lifting device, several steel pipes with the same diameter can be placed under the box, and the crowbar can be pried open to make them roll slowly. When transporting the bed, the steel pipe with appropriate diameter can be inserted into the specially prepared round hole for hoisting. On the machine tool without hanging holes, use specially prepared hooks or rings to put on the steel wire rope. The local areas where the steel wire rope may contact the machine parts shall be padded with soft objects such as wood blocks or rubber to avoid scratching the paint of the machine parts.

So how to improve the cutting quality of sponge cutting machine?

In the process of purchasing sponge cutting machine, the manufacturer of ring knife sponge cutting machine suggests to see how the sponge cutting machine functions? Whether the precision of cutting foam workpiece is high or not, and whether the effect is good or not, the overall function of the sponge cutting machine should be carefully judged. At the same time, do not meet the operation requirements in use. We should purchase according to the actual needs of our own processing and production process, and make a reasonable positioning.

The advantages and disadvantages of ring knife sponge cutting machine are as follows:

1. the service temperature of iron chromium aluminum electrothermal alloy is up to 1400 ℃. Long service life, high surface load, strong oxidation resistance, high resistivity and low price. The disadvantage is that the high temperature strength is low, the plasticity increases with the increase of service temperature, the parts are easy to deform, and the bending repair is difficult.

2. it is higher than iron chromium aluminum at high temperature, not easy to deform at high temperature, not easy to change the structure, good plasticity, easy to repair, high emissivity, non-magnetic, strong corrosion resistance and long service life. Disadvantages: rare nickel metal is used, so the price of this series of products is several times higher than that of iron chromium aluminum, and the service temperature is lower than that of iron chromium aluminum.

Don't buy expensive things blindly. Instead, it is necessary to know whether the software function and mechanical structure of the ring knife sponge cutting machine manufacturer are advanced, whether they can meet the needs in use, and reasonably judge the stability and durability of the sponge cutting machine manufacturer.